About Napco Prima
Prima lets you control your lighting, climate, cameras, and security from a single application. Stay connected from anywhere. Receive real-time alarm status and arm or disarm your security system remotely. Get instant...
Prima lets you control your lighting, climate, cameras, and security from a single application.
Stay connected from anywhere.
Receive real-time alarm status and arm or disarm your security system remotely. Get instant alerts in the event of a security alarm, or simply to be notified when your family arrives home.
Live video monitoring and event-recording.
Set cameras to automatically record security events in your home. Check in on your family and pets when you can’t be there. See who is at the door, or monitor your premises from multiple cameras at once.
One app.
Enjoy full interactive home control including lights, locks, cameras, thermostats, garage doors, and other connected devices.
Feb 25, 2025
Version 7.9.1
Improvements:
Z-Wave add/remove functionality has been greatly improved. You can now also add/remove devices within the same flow.
Arm/Disarm response has been greatly improved.
Adding a confirmation when creating a new user account to let the user know the account was created successfully.
Improved the Thermostat add process.
Updated the user experience when resetting a password. If the current user resets their password, they will be logged out. If they reset another users password, they will not be logged out anymore.
Users should not see phantom Z-Wave devices anymore.
Z-Wave notification functionality has been greatly improved.
Sensor bypass is only available when the system is disarmed now.
Updated type ‘User’ settings to restrict actions they should not have access to.
Fixes:
Fixed a bug that was causing the application to crash when opening a video related push notification.
Fixed a bug that was cutting off the timestamp on events when you played them back.
Fixed a bug that was causing the application to crash upon login.
Thumbnails are now seen on press/motion push notifications.
Automation toggles are now working correctly. Occasionally, hitting a toggle for one automation would change another.
Camera live view is now working smoothly.
Fixed a bug that was showing ‘arm’ instead of ‘disarm’ on live view controls when the panel is in alarm.
The Ecolink Siren now shows the correct options on the control page.
Fixed a bug that was causing errors on the account linking page when you attempted to do a pull down to refresh.
Doorbell/motion push notifications are now correctly redirecting to the video page.
Fixed a bug that was causing the automations screen to load placeholders only.
Fixed aspect ratio issues on camera live view.
Motion detection settings are now seen for the outdoor D3 camera(XOC01).
Filters now properly clear on the video events page.
Fixed a bug that was allowing users to attempt to dim with water control devices.
Previous Versions
Here you can find the changelog of Napco Prima since it was posted on our website on 2023-11-14 18:58:40.
The latest version is 7.9.1 and it was updated on 2025-04-09 01:59:12. See below the changes in each version.
Napco Prima version 7.9.1
Updated At: 2025-02-25
Changes: Feb 25, 2025
Version 7.9.1
Improvements:
Z-Wave add/remove functionality has been greatly improved. You can now also add/remove devices within the same flow.
Arm/Disarm response has been greatly improved.
Adding a confirmation when creating a new user account to let the user know the account was created successfully.
Improved the Thermostat add process.
Updated the user experience when resetting a password. If the current user resets their password, they will be logged out. If they reset another users password, they will not be logged out anymore.
Users should not see phantom Z-Wave devices anymore.
Z-Wave notification functionality has been greatly improved.
Sensor bypass is only available when the system is disarmed now.
Updated type ‘User’ settings to restrict actions they should not have access to.
Fixes:
Fixed a bug that was causing the application to crash when opening a video related push notification.
Fixed a bug that was cutting off the timestamp on events when you played them back.
Fixed a bug that was causing the application to crash upon login.
Thumbnails are now seen on press/motion push notifications.
Automation toggles are now working correctly. Occasionally, hitting a toggle for one automation would change another.
Camera live view is now working smoothly.
Fixed a bug that was showing ‘arm’ instead of ‘disarm’ on live view controls when the panel is in alarm.
The Ecolink Siren now shows the correct options on the control page.
Fixed a bug that was causing errors on the account linking page when you attempted to do a pull down to refresh.
Doorbell/motion push notifications are now correctly redirecting to the video page.
Fixed a bug that was causing the automations screen to load placeholders only.
Fixed aspect ratio issues on camera live view.
Motion detection settings are now seen for the outdoor D3 camera(XOC01).
Filters now properly clear on the video events page.
Fixed a bug that was allowing users to attempt to dim with water control devices.
Napco Prima version 7.5.0
Updated At: 2024-04-18
Changes: Apr 18, 2024
Version 7.5.0
New Features:
Granular automations is now available. This will give users the ability to separate automations actions for each supported device they have connected to their XP02 panel.
Sunrise and Sunset automations to give users the ability to automate actions for their devices during these times.
Night mode support has been added for Arm Stay. If enabled, this will bypass any alarm delays and put the system into alarm immediately.
Improvements:
Added descriptions to WiFi link quality for cameras so non technical users have a good idea of the signal strength.
Updated lock rules so the application should correctly reflect lock/unlock.
Added a walk through guide for automations.
Fixes:
Added a confirmation message to the unlink accounts section.
Fixed a bug that was causing video events to duplicate when switching accounts.
Fixed a bug that was causing the accounts view to display incorrectly after switching accounts.
Fixed a bug that was causing information to not save in the account information section.
Fixed a bug that was causing the back button to disappear when on the ‘Forgot Password Page’
Fixed a bug that was causing accounts to log out after 1 day even if they selected the 2 week option.
Fixed a bug that was causing Rooms to not appear in Settings.
Fixed a bug that was causing sensors to disappear from the notifications page.
Napco Prima version 7.3.0
Updated At: 2024-02-12
Changes: Feb 12, 2024
Version 7.3.0
New Features:
Walkthrough for bypassing sensors.
Improvements:
Cameras now show offline from the live view page.
Dealer activation enhancements.
Improved connection and wakeup times for cameras.
Updated link quality descriptions for cameras/doorbells to be more user friendly.
Updated LED settings on cameras/doorbells.
Added a ‘Siren’ option for live view control.
Updated the UI for dark mode when viewing sensors.
Updated filter settings under video events.
Fixed a crash that happened when checking user details on a slave account.
Fixed a bug that did not allow a user to change user settings if there was no panel attached.
Fixed a bug that was causing the security status to not update properly on the Security page.
Fixed a bug that was causing the application to show the incorrect status when in alarm.
Fixed a bug that was causing keep me logged in for 2 weeks to not function correctly when biometrics was disabled.
Fixed a crash that happened when a currently logged in user tried to view its user details.
Fixed a crash that happened when assigning a Z-Wave device to a room.
Fixed a bug that caused the application to load placeholders without any data in them.
Fixed a crash that happened when switching accounts.
Fixed a bug that caused sensor status to not update when in alarm.
User’s are now informed of an open sensor when arming the system.
Napco Prima version 1.0.4
Updated At: 2023-10-01
Changes: Oct 1, 2023
Version 1.0.4
Introducing the new Prima by Napco mobile application. This application provides you with some exciting features to control your home security system.
Security features include:
Arming and disarming your panel
Locking and unlocking your door locks
Viewing and bypassing your sensors
Video features include:
Viewing motion and doorbell events
Live viewing your cameras and doorbells
Control features include:
Managing Z-wave devices
Climate features include:
Setting your thermostat modes and temperature
Automations to control the devices in your home.
Disclaimer
Official App Store Link
We do not host Napco Prima on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Napco Prima is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
